• <acronym id="gwybb"><label id="gwybb"></label></acronym>
      <table id="gwybb"></table>
    1. <p id="gwybb"></p>
      1. <big id="gwybb"><strike id="gwybb"><tt id="gwybb"></tt></strike></big>
        <acronym id="gwybb"><label id="gwybb"></label></acronym>
        中文版 | русский язык
        Powder Metallurgy Sintering Furnace
        Ammonia Dissociator
        Exothermic Gas Generator Parameters
        Car Bottom Furnace
        Aluminum Brazing Furnace
        Electrically Heated High Temperature Brazing Furnace
        Gas-Electric Hybrid Aluminum Brazing Furnace
        Contact us
        AAddress:71 Jinye Road, High tech Zone, Xi'an City, Shaanxi ProvinceChina.Block
        Production site Production site

        1. Production site and testing, vigorous production site and orderly processing site

        2. In order to ensure the levelness and straightness of the equipment, all the equipment of our company is made on the steel reference platform, which can guarantee the levelness and straightness of the whole production line ±0.2mm and ±0.2mm respectively

        C. Integral test method -- put the blocked muff into the pool as a whole and pressurize it to 0.3mpa. Test the leakage as a whole and hold the pressure for 0.5 hours to prevent possible leakage in other positions except welding seam

        3. Rigorous detection methods

        For the whole system, the air tightness leak inspection of muffle must be strictly carried out at the manufacturing site before delivery. The leak detection method used is one or more of the following combination of simultaneous use, or even all use, until the customer approves the result.

        Bubble detection method → color penetration method → whole test method → helium leak test method

        A. Bubble detection method -- inject compressed air into the sealed muffin, brush glass water at the welding seam for observation and pressure maintenance;

        B. Dye penetration method -- clean the weld as the inspection side, coat it with whitewash powder, and coat the back side of the weld with kerosene with high permeability after being dried, so that the surface is sufficiently infiltrated and penetrates for half an hour, depending on whether the place coated with whitewash powder has any oil stains. No oil stain is qualified, when there is oil stain should be further identified infiltration channels and treatment.

        D. Helium leak detection method -- helium gas with a concentration of over 10% is injected into the sealed muffin and detected by Agilent (phd-4) helium leak detector

        Xi'an Aojie electric heating equipment engineering Co., Ltd. (www.xlpharmacy2.com)2003-2009 All Right Resverved
        Address::71 Jinye Road, High tech Zone, Xi'an City, Shaanxi, China. Zip Code:710076 Shaanxi ICP:05014919
        Phone:18691954955 13609110778